Wiring & Signalling at a 3 way junction point set.
930kB
How and why a CDU does what it does
66kB
Instructions on wiring a Double Slip using different types of Point Motors
1.6mB
How to wire a MR204 to control a set of points automatically
105kB
Wiring the Electrofrogs using the MR204
200kB
Wiring a crossover so that the other track is isolated.
845kB
Wiring the Peco SL-E99 Point Set
1.6MB
Introducing a Isolation switch to seperate a track for programming Locos
403kB
Wiring Instructions for single and multiple point motors
1.7Mb
This shows how to wire a CDU unit when using a momentary switch and MR204
74kB
Full instructions on how to wire a point motor when you have a CDU Bus Bar
2.2Mb
Instructions on how to wire all types of Point Motors from Solenoid to Slow Motion
How to wire a crossover Point Set with two PL-1000 & one Double Pole Double Throw switch
223kb
Send us an E Mail with your requirements and we will try to get
back to you within 48 hours.
